Gypsum Powder Production Line Capacity:
20,000 t/y~300,000 t/y
Automation:
Fully automatic
Calcination system:
Using ebullition furnace to calcine, adopting heat conductive oil furnace as heat source
Fuel:
Natural gas, heavy oil, diesel and coal
Main materials:
Natural gypsum rock, desulfurization gypsum or phosphoric gypsum.
Standard of product quality:
In conformity with national standard "GB/T 9776-2008 construction gypsum"
Description
Gypsum Powder Production Line (natural gypsum) uses civil advanced process equipments, such as Vertical Mill, Boiling Kiln and etc., in which Boiling Kiln is the most widely used calcining equipment at present in China having the advantages of small size, fine producing capacity, simple structure, small occupied areas, low energy consumption, convenient operation, automatic control, good quality, ideal phase composition, steady physical performance, low investment and etc., and it is widely used by calcining process of natural gypsum and chemical gypsum, selling to THAILAND, UZBEKISTAN, COLUMBIA, MEXICO and etc..
At present, we can design production lines with hourly output of 4 tons, 8 tons, 10 tons, 15 tons, 20 tons, 30 tons, 40 tons, and 50 tons and etc., and we can design different production lines as per our client's requirements.
http://www.wuxingmachinery.com/Gypsum-Powder-Production-Line-Equipment/Gypsum-Powder-Production-Line-Equipment-3.html
2018年10月29日星期一
2018年10月25日星期四
Gypsum Powder Production Line Equipment
Gypsum Powder Production Line Equipment,if you need our products,pls contact us.
Process introduction of full automatic gypsum powder manufacturing line
The crusher breaks large gypsum rock into small particles of less than 25 mm in diameter, the particles go through storage and transportation equipments into the mill for grinding, use a powder concentrator to select qualified gypsum powder of required fineness and send them into the boiling furnace for calcination. The left unqualified particles will return to the mill for regrinding until meet the requirement. Calcined qualified gypsum powder will be send into the clinker silo for storage or to the workshop for use.
gypsum powder making plant
1. Gypsum Powder Production line Main Technology
gypsum mine ->first breaking ->second breaking ->grinding ->calcining ->aging ->finished products
2. Features of calciner
1)Small but exquisite equipments, great production capacity
2) Simple structure, un-damageable
3)Compact equipments, needs little soil area
4)Low energy consumption
5)Convenient operation, easy control
6)Fine quality, ideal phase composition of Gypsum of Paris and steady physical capability
7)Low investment of foundation construction and low operation expenses
http://www.wuxingmachinery.com/Gypsum-Powder-Production-Line-Equipment/Gypsum-Powder-Production-Line-Equipment-3.html
Process introduction of full automatic gypsum powder manufacturing line
The crusher breaks large gypsum rock into small particles of less than 25 mm in diameter, the particles go through storage and transportation equipments into the mill for grinding, use a powder concentrator to select qualified gypsum powder of required fineness and send them into the boiling furnace for calcination. The left unqualified particles will return to the mill for regrinding until meet the requirement. Calcined qualified gypsum powder will be send into the clinker silo for storage or to the workshop for use.
 |
| Gypsum Powder Production Line Equipment |
gypsum powder making plant
1. Gypsum Powder Production line Main Technology
gypsum mine ->first breaking ->second breaking ->grinding ->calcining ->aging ->finished products
2. Features of calciner
1)Small but exquisite equipments, great production capacity
2) Simple structure, un-damageable
3)Compact equipments, needs little soil area
4)Low energy consumption
5)Convenient operation, easy control
6)Fine quality, ideal phase composition of Gypsum of Paris and steady physical capability
7)Low investment of foundation construction and low operation expenses
http://www.wuxingmachinery.com/Gypsum-Powder-Production-Line-Equipment/Gypsum-Powder-Production-Line-Equipment-3.html
2018年10月22日星期一
Gypsum Board Equipment Manufacturers
Gypsum Board Equipment Manufacturers
High Quality Gypsum Board Making Equipment:
1. Annual output:
5million to 30 million sqm(based on thickness of 9.5mm gypsum board)
2. Working time: 24hours/day and 300 working days/year
3. Raw material: Gypsum powder, shielding paper, modified starch, foaming agent, glue
4. Fuel: Natural gas, diesel, heavy oil or coal
5. Product quality and specification:
1) The product is in compliance with National Standard GB/T9775-2008
2) Product specification:
Length: 2400mm~3600mm
Width: 1200mm or 1220mm
Thickness: 8mm-20mm
6. Main process:
1)Raw material blending;
2)Shaping;
3)Wet board/panel conveying;
4)Drying;
5)Dry board/panel conveying;
6)Finished product stacking and storage.
1. Annual output:
5million sqm(based on thickness of 9.5mm gypsum board)
2. Working time: 24hours/day and 300 working days/year
3. Raw material: Gypsum powder, shielding paper, modified starch, foaming agent, glue
4. Fuel: Natural gas, diesel, heavy oil or coal
5. Product quality and specification:
1) The product is in compliance with National Standard GB/T9775-2008
2) Product specification:
Length: 2400mm~3600mm
Width: 1200mm or 1220mm
http://www.wuxingmachinery.com/
Thickness: 8mm-20mm(can be adjusted)
High Quality Gypsum Board Making Equipment:
1. Annual output:
5million to 30 million sqm(based on thickness of 9.5mm gypsum board)
2. Working time: 24hours/day and 300 working days/year
3. Raw material: Gypsum powder, shielding paper, modified starch, foaming agent, glue
4. Fuel: Natural gas, diesel, heavy oil or coal
5. Product quality and specification:
1) The product is in compliance with National Standard GB/T9775-2008
2) Product specification:
Length: 2400mm~3600mm
Width: 1200mm or 1220mm
Thickness: 8mm-20mm
 |
| Gypsum Board Equipment Manufacturers |
6. Main process:
1)Raw material blending;
2)Shaping;
3)Wet board/panel conveying;
4)Drying;
5)Dry board/panel conveying;
6)Finished product stacking and storage.
1. Annual output:
5million sqm(based on thickness of 9.5mm gypsum board)
2. Working time: 24hours/day and 300 working days/year
3. Raw material: Gypsum powder, shielding paper, modified starch, foaming agent, glue
4. Fuel: Natural gas, diesel, heavy oil or coal
5. Product quality and specification:
1) The product is in compliance with National Standard GB/T9775-2008
2) Product specification:
Length: 2400mm~3600mm
Width: 1200mm or 1220mm
http://www.wuxingmachinery.com/
Thickness: 8mm-20mm(can be adjusted)
2018年10月16日星期二
Gypsum Board Production Line Factory
we are Gypsum Board Production Line Factory,if you need our products,you can contact us.
1 .Raw material supplying system
Raw material is transported and lifted to feeding hopper, after measurement it comes to vertical mixer. Face and back paperboard are lifted to each shelf. They are tensioned with special tension unit. Mixed material from vertical mixer falls down to back paperboard, then formed into shape and covered with face paperboard, after last flattening the semi finished plasterboard is completed.
Gypsum Board Production Line
2.Mixer
It will mix the raw material completely.
Vesicant and starch and powder and water will be blended in the mixer.
3.Conveying system
Semi-finished plasterboard from formation section is automatically edge trimmed into continuous palsterboard, conveyed to concreting station and automatically cut.
http://www.wuxingmachinery.com/Gypsum-Board-Production-Line-Equipment/Gypsum-Board-Production-Line-Equipment-5.html
1 .Raw material supplying system
Raw material is transported and lifted to feeding hopper, after measurement it comes to vertical mixer. Face and back paperboard are lifted to each shelf. They are tensioned with special tension unit. Mixed material from vertical mixer falls down to back paperboard, then formed into shape and covered with face paperboard, after last flattening the semi finished plasterboard is completed.
Gypsum Board Production Line
2.Mixer
It will mix the raw material completely.
Vesicant and starch and powder and water will be blended in the mixer.
3.Conveying system
Semi-finished plasterboard from formation section is automatically edge trimmed into continuous palsterboard, conveyed to concreting station and automatically cut.
http://www.wuxingmachinery.com/Gypsum-Board-Production-Line-Equipment/Gypsum-Board-Production-Line-Equipment-5.html
2018年10月11日星期四
gypsum board manufacturing machine
gypsum board manufacturing machine,if you need our products,we can supply you .
After installation and commissioning, we will provide technical formula suitable with client's demand, ensuring clients can produce qualified finished products. Additionally, we will help local experienced engineers for one year to master the production process.Our professional sales team, designing team, manufacturing team, installation team, process team, service team, promises you a 100% perfect project.
 |
| gypsum board manufacturing machine |
Gypsum Board Manufacturing Machine is composed of raw material supply system, the system board systems, conveyor systems, horizontal systems, drying systems, the panel system, cutting systems, and other components used in the production of gypsum board special equipment .
Looking for Calcium Silicate Board Production Line
Looking for Calcium Silicate Board Production Line Use place:
Fiber strengthened metallic element salt Board is additionally named metallic element salt Board, that is created from chemical element materials, metallic element materials and specific amount of fiber. it's made when many procedures like pulp preparation, forming, autoclaving, drying, sprucing and after-processing. it's benefits like lightweight in weight, high in strength, sensible in process and straightforward in decorating, and it may has performances of warmth insulation and fireplace fighting.
Commercial buildings: business buildings, recreation venues, searching malls, hotels, industrial buildings; factories, warehouses, residential buildings; new homes, restored public places; hospitals, theaters, stations.
Is the wall, ceiling, flooring, furniture, road noise, sound-absorbing barrier, ship bulkheads and duct and different industrial boards and sound-absorbing walls, ceiling sound, running walls, composite wall panels and different fields.
http://www.wuxingmachinery.com/Calcium-Silicate-Board-Production-Line-Equipment/Calcium-Silicate-Board-Production-Line-Equipment-1.html
Fiber strengthened metallic element salt Board is additionally named metallic element salt Board, that is created from chemical element materials, metallic element materials and specific amount of fiber. it's made when many procedures like pulp preparation, forming, autoclaving, drying, sprucing and after-processing. it's benefits like lightweight in weight, high in strength, sensible in process and straightforward in decorating, and it may has performances of warmth insulation and fireplace fighting.
 |
| Looking for Calcium Silicate Board Production Line |
Commercial buildings: business buildings, recreation venues, searching malls, hotels, industrial buildings; factories, warehouses, residential buildings; new homes, restored public places; hospitals, theaters, stations.
Is the wall, ceiling, flooring, furniture, road noise, sound-absorbing barrier, ship bulkheads and duct and different industrial boards and sound-absorbing walls, ceiling sound, running walls, composite wall panels and different fields.
http://www.wuxingmachinery.com/Calcium-Silicate-Board-Production-Line-Equipment/Calcium-Silicate-Board-Production-Line-Equipment-1.html
订阅：
评论 (Atom)